Curtiss P-40 Warhawk {1/4.6} – Laser Parts Kit (JB)

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)


or 4 payments of AUD$90.48 with Afterpay








Wing Area

1600 sq


28-35 lbs


65 – 100cc


Add Plans

Add to Wishlist


Plans are not included with Kit but are available from us HERE

Accessories are available through the following vendors and not supplied by LCKA.

Rob Pike:
-12 Flared Exhaust Stacks (resin cast)
-Cockpit Kit

Century Jet Models:
-Cowl (plans show built-up) #3702
-Canopy (plans so built-up) #3703
-Main Gear Covers (Plans show built-up) #3704
-Scale Retracts (CJM Main Gear #34000)
-Scale Retracts (CJM Tail Wheel #24000)
-6 1/2” Aluminum Flying Spinner

Sierra Giant Scale:
-Scale Retracts

*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.

Additional information

Weight 5 kg
Dimensions 94 x 31 x 10 cm

1 review for Curtiss P-40 Warhawk {1/4.6} – Laser Parts Kit (JB)

  1. Rated 5 out of 5

    Robert Miller

    For years I have purchased laser kits from the USA, This time I contacted Brad for a kit of Jerry’s Warhawk and could not of been any happier. Brad was easy to contact, responds very quickly to enquiries and had the order cut and packed in no time. Upon inspection of the kit I found it to be well packed, parts were nicely laid out on their sheets and the part numbers clearly marked. The wood was cut well (no charred edges), just a nice lite honey coloured mark from the laser. For anyone wishing to build from plans, I would highly reccomend Laser Cut Kits Australia.

Add a review

Your email address will not be published. Required fields are marked *

five × 4 =

You may also like…

All kit orders take 6 weeks to ship. Plans take 1 week to ship. Everything on this site is produced to order. Dismiss