Grumman F8F Bearcat {1/4.8} – Laser Parts Kit (NZ)

USD$221.09

Scale

1/4.8

Wingspan

86”

Length

69”

Wing Area

1480 sq

Weight

28-34 lbs

Engine

3.7 cu”
Add to Wishlist

Description

Accessories are available through the following vendors and not supplied by LCKA.

Nick Ziroli:
-Plans
-F8F Bearcat Fiberglass Cowl
-F8F Bearcat Canopy
-Vacuum Formed Dummy Engines
-FTE-Cast Resin Dummy Engine
-Canopy Rail Set for Warbirds
-Vinyl Graphics
-Pilot Figure
-All Undercarriage requirements.
-Wheels

The giant scale F8F Bearcat plan set is 1/4.8 scale and consists of five large sheets that clearly illustrate all structure as well as showing installation of flaps and retracts. The F8F Bearcat plan shows the installation of Robart retracts, fixed wire gear, servos and Quadra 35engine and features one piece wing. The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com forums for Nick’s plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon – Fri EST 631-467-4765. The plans have instructions and building notes on the plans. There is quality landing gear made by other manufacturers such as Sierra Giant Scale or Century Jet. If you choose gear or an engine not shown on the plans you should have them on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with1oz fiberglass cloth and ZAP Z-poxy finishing resin and elevator and rudder with iron on cloth covering such as solartex.. Nick Ziroli designs are equally at home at the local sport flying field or the winner’s circle at prestigious scale events such as Top Gun and the Scale Master’s; you can add as much detail as you like. Nick Ziroli Plans has building and scale accessories available for the F8F Bearcat. Over the years, Nick’s designs have gained the enviable reputation for being among the most “flyable” giant scale models available.

]

*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.

Additional information

Weight 6 kg
Dimensions 93 x 31 x 10 cm

Reviews

There are no reviews yet.

Be the first to review “Grumman F8F Bearcat {1/4.8} – Laser Parts Kit (NZ)”

Your email address will not be published. Required fields are marked *

19 − fifteen =