Plans & Accessories are sold separately from Vailly Aviation
The HAWKER HURRICANE (one of our most successful designs) is scaled at 2.3 inches to the foot. The plans show all structures drawn full size including the installation of flaps and retracts. Full size templates are also shown for all ribs and formers. The parts available are: a fiberglass cowl, a fiberglass belly scoop, clear plastic canopy, a set of 6 vacuum-formed dummy exhaust stacks, carb intake scoop and an aluminum spinner and backplate. Primary construction is light plywood, balsa and spruce or pine using conventional building techniques. All structures are built-up. The rear portion of the fuselage and all control surfaces are prototypical fabric covered while the forward portion of the fuselage is sheeted with 1/8” balsa. The wings and stab are sheeted with 3/32” balsa.
*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.