North American B-25 Mitchell {1/7} – Laser Parts Kit (NZ)

$389.00

Scale

1/7

Wingspan

118”

Length

95”

Wing Area

2400 sq

Weight

40-45 lbs

Engine

38cc (2)
Add to Wishlist

Description

Accessories are available through the following vendors and not supplied by LCKA.

Nick Ziroli:
-Plans
-B-25 Mitchell 118″ Cowl
-B-25 Mitchell 118″ Canopy Set
-FTE-Cast Resin Dummy Engine
-Vacuum Formed Dummy Engines
-Pilot Figure
-Vinyl Graphics
-Aluminum Wing Tube and Sleeve Set
-All Undercarriage requirements.
-Wheels

The B-25 Mitchell plan shows the installation of Robart retracts, fixed wire gear, servos and Zenoah G-23 engine and features three piece wing. The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com forums for Nick’s plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon – Fri EST 631-467-4765. Nick Ziroli Plans recommends covering the airframe with1oz fiberglass cloth and ZAP Z-poxy finishing resin and elevator and rudders with cloth covering such as solartex. Nick Ziroli designs are equally at home at the local sport flying field or the winner’s circle at prestigious scale events such as Top Gun and the Scale Master’s; you can add as much detail as you like. Nick Ziroli Plans has building and scale accessories available for the B-25 Mitchell. Over the years, Nick’s designs have gained the enviable reputation for being among the most “flyable” giant scale models available.

*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.

Additional information

Weight 7 kg
Dimensions 93 x 31 x 10 cm

Reviews

There are no reviews yet.

Be the first to review “North American B-25 Mitchell {1/7} – Laser Parts Kit (NZ)”

Your email address will not be published. Required fields are marked *

four × 4 =