Accessories are available through the following vendors and not supplied by LCKA.
-P-51D or B Mustang Fiberglass Cowl
-P-51D orB Mustang Fiberglass Belly Scoop
-P-51B Mustang Canopy
-P-51D or B Mustang Fiberglass Drop Tank
-Hamilton Standard Scale Static Propeller Kit (4 Blades)
-Canopy Rail Set for Warbirds
-All Undercarriage requirements.
The giant scale P-51B Mustang plan set is 1/4.6 scale and consists of five large sheets that clearly illustrate all structure as well as showing installation of flaps and retracts. The P-51 Mustang plan shows the installation of Robart retracts, fixed wire gear, servos and Zenoah G-62 engine and features one piece wing. The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com forums for Nick’s plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon – Fri EST 631-467-4765. The plan includes full-size templates for all the required parts allowing you to cut a complete “kit” before you start construction. If you choose gear or an engine not shown on the plans you should have them on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with 1 oz fiberglass cloth and ZAP Z-poxy finishing resin and elevator and rudder with iron on cloth covering such as Solartex. Nick Ziroli Plans has building and scale accessories available for the P-51 Mustang.
*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.