Scheibe-Loravia Topaze {1/3.5} – Laser Parts Kit

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)


or 4 payments of AUD$62.25 with Afterpay






Wing Area


12 lbs


Add to Wishlist


*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.

Additional information

Weight 4 kg
Dimensions 93 x 31 x 10 cm

1 review for Scheibe-Loravia Topaze {1/3.5} – Laser Parts Kit

  1. Rated 5 out of 5

    Dete Hasse

    I’ve had my kit for a while now. Packaging/post and service was first class.
    The wood selection was good and the cutting very clean and not much burning of the edges of ply. Acceptable on the softer Balsa. The thin ply parts were of Birch ply which is excellent quality. I’ve gone over the plan and parts several times now and I believe that all parts are present. As for the final fit, I won’t know until I start on the construction. That’s been delayed due to building my ASK-8 first and a house painting rush before winter. Buy with confidence.

Add a review

Your email address will not be published. Required fields are marked *

2 × 1 =