Supermarine Mk I-V Spitfire {1/4.4} – Laser Parts Kit (NZ)

AUD$372.90

or 4 payments of AUD$93.23 with Afterpay

 

Scale

1/4.4

Wingspan

100”

Length

81”

Wing Area

1575 sq

Weight

30-34 lbs

Engine

62-85cc

Add Plans

Add to Wishlist

Description

Accessories are available through the following vendors and not supplied by LCKA.

Nick Ziroli:
-Supermarine Spitfire Mk I-V Fiberglass Cowl
-Supermarine Spitfire Mk I-V Canopy
-Supermarine Spitfire Mk I-V Fiberglass Belly Scoop
-Supermarine Spitfire Mk I-V ABS Radiators (water & oil)
-Supermarine Spitfire Scale Accessories
-Supermarine Spitfire Mk I-V Scale Exhaust Manifold-
-Canopy Rail Set for Warbirds
-Pilot Figure
-Aluminum Wing Tube and Sleeve Set
-All Undercarriage requirements.
-Wheels

Our designs are equally at home at the local sport flying field or the winner’s circle at prestigious scale events such as Top Gun and the Scale Master’s; you can add as much detail as you like. Over the years, our designs have gained the enviable reputation for being among the most “flyable” giant scale models available. The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. Most plans have separate instruction guides and building notes on the plans. The SPITFIRE plan set consists of four large sheets that clearly illustrate all structure as well as showing installation of gear and flaps.

There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com forums for Nick’s plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon – Fri EST 631-467-4765. If you don’t have the tools or time to cut your own kit Nick Ziroli Plans now carries a laser cut short wood kit for the Spitfire plan that contains all the parts that you would otherwise have to cut by hand from balsa and plywood, it does not include sheet or stick wood or hardwood, balsa blocks. The plans have a separate instruction guide and building notes on the plans. If you choose gear or an engine not shown on the plans you should have them on hand when you start construction to make any changes needed for mounting.

*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.

Additional information

Weight 6 kg
Dimensions 93 × 31 × 10 cm

You may also like…

Select Currency
AUD Australian dollar
EUR Euro