Fokker DR-1 Triplane {1/3} – Laser Parts Kit (RW)

AUD$361.90

or 4 payments of AUD$90.48 with Afterpay

Scale

1/3

Wingspan

93”

Length

71”

Wing Area

Weight

32-37 lbs

Engine

62-100cc

Add Plans

Add to Wishlist

Description

Accessories are available through the following vendors and not supplied by LCKA.

Nick Ziroli:
-Ron Weiss DR-1 / DVIII Fiberglass Cowl
-Scale WWI Type II Lewis Gun with twin handles
-Scale WWI Type III Lewis Gun with twin handles
-Scale WWI Spandau with Gun Sight Machine Gun Kits
-Oberursel UR2 1/3 Scale Cast Resin Kit
-Wheels

The giant scale FOKKER DR-1 plan set is 1/3 scale and consists of four large sheets that clearly illustrate all structure. The FOKKER DR-1 plan shows the installation of fixed wire gear, servos and Zenoah G-62 engine and features three, one piece wings. The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com forums for Ron Weiss plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon – Fri EST 631-467-4765. The plans have instructions and building notes on the plans. If you choose an engine not shown on the plans you should have it on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with an iron on cloth covering such as solartex. Nick Ziroli Plans has building and scale accessories available for the FOKKER DR-1

*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.

Additional information

Weight 4 kg
Dimensions 93 × 31 × 10 cm
Select Currency
AUDAustralian dollar
EUR Euro